Maytag Refrigerator Not Cooling/Freezing [2022] (13 Repairs)

Does your Maytag refrigerator not cool or freeze properly?

The following is some excellent news.

This issue can be resolved at home.

And this can save you a significant amount of money and time on lengthy customer support calls.

How?

Keep reading to discover:

  • Thirteen straightforward solutions to fix a Maytag refrigerator that isn’t cooling or freezing
  • The potential causes for this issue with your Maytag refrigerator.
  • The purpose of “Showroom” mode and how to remove your device from it.
  • The optimal clearances and temperatures (inside and outside) for refrigerators.
  • Much more…

Why won’t my Maytag refrigerator chill or freeze?

Due to clogged vents or unclean components, your Maytag refrigerator is not cooling or freezing. The former is typical of overstocked refrigerators. The latter can be a soiled door gasket. In addition to condenser fans and coils. Other potential causes include improper temperature, setup, and clearances.

Maytag refrigerator not cooling or freezing? Here are thirteen solutions.

1: Ensure that the temperature is appropriate.

Check your refrigerator’s temperature before trying additional methods.

“Why?”

Because this is often neglected.

Yes, you may have already set the correct temperature on your refrigerator.

However, you or someone else may have accidentally modified the settings.

Consequently, your Maytag refrigerator is no longer cooling or freezing.

If this is the case, the solution is rather simple.

Simply alter the temperature of your refrigerator.

According to Maytag, the optimal temperature for refrigerators is 37oF (2.8oC). However, it can also range from 32°F to 40°F (0°C to 4.4°C).

While freezers should be set to 0 degrees Fahrenheit (-18 degrees Celsius).

Now, if you have touchpad buttons for control, they may be first puzzling.

Because they do not display the temperature in degrees, this is the case. The greater the number, the colder your refrigerator or freezer will be.

Thus, remember the following:

  • To increase the temperature, reduce it by one degree.
  • To lower the temperature, increase the control by one setting.

Repeat the procedure until the refrigerator reaches its typical cooling temperature.

Changes may not appear immediately. It can take refrigerators up to 24 hours to stabilize. Check your refrigerator and freezer again after a day has passed.

2: Turn off “Showroom” and “Demo” mode.

Alternatively, there may be nothing wrong with your Maytag refrigerator.

And the reason it is neither cooling nor freezing is due to a particular mode.

“Wait. What manner?”

Maytag is equipped with a “Showroom” or “Demo” mode.

As its name implies, it is utilized when refrigerators are still in the store.

In this mode, the refrigerator’s lights activate when the door is opened. However, all of its other functions, including cooling, are disabled.

How can I tell whether my Maytag refrigerator is in Demo mode?

If it is activated, the term “Showroom” will appear on the display panel.

It is typically located on the right, above “order” and “replace.”

Nevertheless, this may differ by model.

Again, this setting may be mistakenly triggered.

So, if you see that your device is in “Demo” mode, perform the following.

How to disable it:

Each model will have a distinct method. However, the general approach for most units is comparable.

Simply press and hold the listed buttons for approximately three seconds.

  • MRT711S – “Temp.”
  • MFI2570FE – « Light » plus « Power Cold »
  • MFI2269F – “Refrigerator Starting to Cool”
  • MFW2055F – “Fridge Temp” Plus “Freezer Temp.”
  • MFF2055F consists of “Power Cold” and “Moisture Control.”
  • MFT2776FE / MFX2676FR / MSC21C6MF / MSS26C6M – « Options » plus « Water Filter »

Then, wait until “Showroom” is no longer visible.

In some models, you may only need to increase the temperature to its maximum to exit “Demo” mode. Here is a reference manual for your usage.

It refers to placing your unit in “Showroom” mode. However, the methods to deactivate it are same, so you can also follow them.)

3: Wait until your device is stable.

Is this a recently purchased Maytag refrigerator?

If so, and the installation occurred less than 24 hours ago, you have nothing to worry about.

After a day, the temperature in the majority of refrigerators stabilizes. Therefore, it is normal if your refrigerator has not cooled within that time frame.

“Help! The issue persists after at least two days. What am I to do?

Try the alternative solutions listed below.

Maytag’s customer care phone number is 208-616-5145.

Alternatively, try checking in to the Maytag Owner Support Center to submit your inquiries.

4: Check your power supply twice

This is another simple remedy that some individuals may overlook.

A loose connection may also contribute to this issue. So, if your refrigerator isn’t cooling, examine its cord as well.

Verify that it is correctly plugged into the outlet.

Additionally, check whether the linked circuit breaker is on.

However, if everything is functioning normally, there may be a problem with the cord.

However, do not reach a conclusion just yet.

There are many potential causes. And I will discuss each of them below.

5: Power cycle your fridge

Does your refrigerator have a heavy ice buildup despite not chilling properly?

If so, try this simple solution.

Reset your Maytag refrigerator.

This is possible by a combination of button presses.

Additionally, by just unplugging your refrigerator.

To accomplish this:

  1. Remove the refrigerator’s plug from the outlet. (Turn off the circuit’s breaker.)
  2. Wait around 5 to 10 minutes.
  3. Connect your refrigerator to a power source. (Turn the circuit breaker on.)

Give your refrigerator time to adjust on its own after it has been reset. Then, determine whether it is cooling again.

If the problem persists, it is possible that the circuit board is defective. This is analogous to the computer motherboard that handles all refrigerator functions. No matter what, if it is damaged, your unit will not function properly. And the position must be filled by an expert.

6: Restructure its content

If your refrigerator is not cooling, it could possibly be due to overcrowding.

That is, there are too many items within. Therefore, some objects may block the vents.

Vents serve to transport cold air from the freezer to the refrigerator compartment.

Therefore, if they are stopped, the circulation of cold air inside will be disrupted. Consequently, there will be a warm compartment.

If you are experiencing this, the following are further signs:

  • Excessive frost inside.
  • Inconsistent temperature.
  • Frozen items within the refrigerator section (outside the freezer).

How to correct:

This will be a simple task.

  1. Look find the refrigerator’s vents first. (Typically located on the rear wall.)
  2. Move the merchandise that is too close to them.
  3. Rearrange your belongings with ventilation in mind.
  4. Get rid of old items and leftovers to make room in your refrigerator.

7: Keep your refrigerator well-stocked.

But what if your refrigerator is the contrary?

There is little substance inside. Clearly, the vents are not clogged.

Likewise, if overstocking is undesirable, so is understocking.

The items within aid in maintaining coolness.

Therefore, if your refrigerator does not have enough of them, it must work twice as hard to keep its inside cool.

The only solution is to ensure that your refrigerator is well-stocked.

This means that it must contain enough items that can retain cooling. However, not so many that they obstruct the air vents.

8: Avoid opening it too frequently

How often do you open your refrigerator?

Because the longer you maintain this position, the more heated air will enter your unit.

This will add additional moisture to your refrigerator. Then cause frost to accumulate within the walls.

Additionally, it will allow the chilly air to escape from your unit.

What should one do?

To keep the coldness of your appliance, stop from opening it for a while.

Additionally, inspect the door seal for any cracks or gaps.

If the door seal is intact, the doors may have been left open for an extended period of time.

So wait for your refrigerator’s cooling temperature to return.

If not, go to the following tip.

9: Examine and wipe the door seal

Have you checked the refrigerator’s doors?

If they are not completely shut and cold air may be felt from the inside, there may be a problem with the gasket.

What is that?

It is the rubber lining of your refrigerator’s doors.

Its purpose is to keep them securely closed. In order to prevent the cold air from escaping the device.

As the door gasket is frequently touched by human hands, it might become soiled over time. And this can compromise its airtightness.

Therefore, if you haven’t cleaned it in a while…

It could be the cause of your Maytag refrigerator’s insufficient cooling.

How to maintain gasket cleanliness:

  1. Create a solution of baking soda and warm water. Add 1 to 2 tablespoons (14.3 to 28.3 grams) of baking soda per quart (946 ml) of water.
  2. Apply a portion to a clean microfiber cloth.
  3. Wipe off all surfaces to eliminate mold and discoloration.
  4. The door seal should be dried with a clean, soft towel.

However, if you observe cracks in the door gasket, it is time to replace it.

Note: For difficult-to-reach grooves and other areas, use a tool with a small point. Consider a cotton swab or a cloth-wrapped stick.

10: Keep it away from all sources of heat and chilly rooms.

Did you know that the position of your refrigerator might also affect its ability to maintain a cool temperature?

Yup. The ambient temperature may also hinder the cooling performance of your Maytag refrigerator.

So, where is it located today in your home?

If it is next to a heat source, such as a stove or oven, it may be the root of the problem. As effectively as if it were placed in direct sunlight.

As a result, the compressor will work more to chill the interior of your refrigerator. And it may malfunction over time.

However…

It is also not recommended to store your refrigerator in an unheated room.

“Why then?”

The compressor will not operate at all if the ambient temperature falls to a level that is insufficiently low.

In conclusion, a cold room is worse than a warm space.

Oh no!

What is the optimal refrigerator room temperature?

The temperature in the room should not exceed 110°F (43°C). In addition, at least 55°F (13°C).

These are the optimal operating temperatures for a refrigerator.

11: Move it slightly away from the wall

Also vital for our appliances are clearances.

Specifically in regard to refrigerators Given that heat must escape from their coils.

Without spaces on all sides, they will eventually overheat.

Additionally, poor cooling can result in:

  • Machine noises
  • Expensive electricity costs
  • System malfunction.
  • Compressor troubles.

How to correct:

Give your refrigerator extra clearance.

How much room is required between a refrigerator and a wall?

According to the Maytag handbook, all sides, including the top, must measure at least 14 inch (6.35 mm).

But if it is adjacent to a fixed wall, a spacing of 2 12 inches (63.5 mm) is required on both sides.

12: Clean the condenser coils.

If nothing else works, you may have a condenser issue.

The function of the heat exchanger is to remove heat from the refrigerant as it goes through the coils. Therefore, it should appropriately escape into the chamber.

However, since they tend to collect dirt…

They might become covered in dust and hair if not routinely cleaned.

Now, this will restrict heat dissipation. That can alter the interior of your refrigerator.

How to correct:

Perform a comprehensive cleaning of the condenser coils.

Note: For your safety, disconnect your Maytag refrigerator before proceeding. You can also turn off the circuit breaker to be certain.

After that:

  1. Remove the refrigerator from the wall. (Just enough to allow for easier cleaning access.)
  2. Find your condenser coils. (These black bars can be found on the top, rear, and bottom of your refrigerator.)
  3. If your coils are covered by a plate, pull or slide it until it detaches.
  4. Using a vacuum with a hose attachment, clean the coils quickly.
  5. Then, use a long condenser coil brush to clean away the dirt.
  6. Repeatedly vacuum the coils to remove any remaining debris.
  7. Reattach the plate to its original position. (If you did step #3.)

And that is all.

Note: Clean the condenser coils every two to three months. However, if you have a pet at home, you may need to perform this maintenance more frequently.

13: Examine the condenser fan motor

If the condenser coils are not the issue, then…

Check the fan’s functionality.

This eliminates heat from the refrigerant while blowing air to the condenser. Therefore, this component is essential for preventing overheating.

However, if it is blocked, it will not draw as much air to the condenser. Additionally, it may result in a heated refrigerator compartment.

How to determine whether the condenser fan is operating or not:

Step 1: Unplug the refrigerator first to prevent electrical shock.

Step 2: Locate the condenser fan in the refrigerator.

Typically, it is situated at the back of the refrigerator-freezer side.

Step 3: Remove the lid or access panel.

Then, examine whether there is any debris or obstruction between its blades.

Step 4: Using any object, spin the condenser fan blade.

  • If it spins smoothly, this is likely not the source of the problem.
  • If not, it may be necessary to replace the condenser fan.

Note: For this, you should contact an experienced repairman to evaluate the situation.