27 Roomba Cleaning Tips To Keep Your Home Tidy (2022)

What in the world would I do without my Roomba?

Roomba has facilitated the lives of numerous people for nearly two decades.

Ensuring household owners that their prized residences are well-kept.

Sure, it’s impressive to watch Roomba remove the tiniest crumb of cracker off the sofa’s edge.

But nonetheless! Your Roomba is capable of so much more…

Learn the following:

  • 27 Roomba-specific hints and tips
  • If Roomba is capable of cleaning carpets and rugs.
  • When to replace and clean Roomba components.
  • How to make Roomba clean the entire home.
  • Much more…

27 of the finest Roomba tips

1: Move your pets outside.

In general, Roomba machines record noise at roughly 70-80 dB. When running, sufficiently loud to be heard on the lower or upper floors. However, not loud enough to disturb sleep.

However, this noise frequency may be too loud for dogs and cats.

Dogs have extremely acute hearing. That their hearing is three times better than that of humans.

Thus, they may find Roomba’s noise unpleasant.

Before running your gadget, move your dogs outside. Allow them some time to romp around the backyard.

If it is not possible, consider relocating them to a confined room.

2: Empty the trash can after each usage.

Your Roomba will cease cleaning when the dustbin is full.

If you utilize a Clean Base, your gadget will return to it automatically to dispose of its waste. If not, your Roomba will stop cleaning in the middle of a session.

To avoid this from occurring, empty the trash can after every use.

If the item is washable, run it under warm water to eliminate additional grime.

Note: Remove the filter before washing the washable wastebasket.

3: The next step is to clean the brushes, extractors, and caster wheel. frequently

Roomba can clean the entire home. But not alone.

To maintain the optimal state of your gadget, perform thorough and routine maintenance.

Once each week, clean the brush and extractor. If you have pets at home, you should clean your home at least twice every week. Once every two weeks, you should clean the front caster wheel.

This makes your Roomba’s cleaning more efficient.

Additionally, it will help your device last longer. As it reduces dirt accumulation and machine damage.

4: Clean the filter once a week.

The filter’s purpose is to prevent any dust or allergens from re-entering the air while your gadget vacuums.

Therefore, to maintain pure air in your home, clean the Roomba filter once every week. If you have pets at home, twice.

Caution: Never clean the filter. This item is not intended to be cleaned or come into touch with fluids.

Simply tapping or shaking the filter will help to clean it.

5: Regularly wipe down sensors and charging contacts

Your Roomba cleans “smartly” due to its incorporation of cutting-edge technologies.

Due to its sensors, it wanders around, gathers up dirt, and avoids cliffs.

Roomba sensors are essential for the efficient operation of your gadget.

If the sensors become obstructed or soiled, your device may malfunction.

Therefore, clean the iAdapt localization camera, cliff sensors, charging contacts, and floor tracking sensors once every month. While the full bin sensors are checked every two weeks.

You may clean it with either melamine foam or microfiber cloth.

Watch this brief video to discover the location of the Roomba’s sensors:

6: Purchase replacement parts in advance

Certain Roomba components may degrade with repeated use. Compromising the cleaning efficacy of your equipment.

You cannot predict when your Roomba may malfunction.

Consider purchasing replacements in advance. Or at least one month before to the suggested replacement interval.

Here is a reference for how frequently you should replace Roomba parts:

  • Filter: twice per month
  • Front caster wheel: once per year
  • Brushes and extractors: every six to twelve months

Buying reminder: To assure product quality, purchase from the official iRobot store.

7: Place low-lying furniture flush against the walls

Using an infrared sensor, Roomba can detect furniture or objects along its path.

If there is sufficient space underneath the furniture for the Roomba to maneuver, the device will continue to clean underneath it.

If not, Roomba will immediately modify its course to avoid the obstacle.

There are no problems with that.

The issue is that Roomba can become stuck behind massive furniture. Eventually cease cleaning.

Consider flushing low-lying furniture to the walls as a solution. This will provide a cleaner and safer cleaning path for your device.

8: Slender sofa chairs

Roomba units range in height from 3.23 in (82 mm) to 1.38 in (89 mm) (88 mm).

That is, it can fit beneath beds or sofas with a clearance of no more than 3.6 inches (92 mm).

Clearly, Roomba cannot clean below it. Therefore, these areas will collect dirt, dust, and allergens. Which negates the purpose of using Roomba to clean your home.

You can lean light, low-sitting sofa chairs and tables against the walls.

This will allow your Roomba to clean under furniture that cannot be reached.

9: Turn dining room tables upside down

What is one of Roomba’s most difficult courses? The kitchen table.

The foot of the dining table and dining chairs may hinder your device’s reception.

Despite the fact that Roomba can reliably reach specific regions, numerous small spaces on the dining table remain undisturbed.

As a remedy, you can invert the dining room chairs. And place it on the table until further notice.

This will provide sufficient space for Roomba to completely clean the dining area.

10: Remove clutter from the floors.

Any clutter can disrupt the cleaning routine of Roomba. Additionally, it increases the cleaning time.

Before setting your Roomba to clean, tidy up your space first.

Ensure there are no obstructions in the device’s path.

To assist you, here is a brief list of items you should eliminate:

  • Toys and books.
  • Clothes and footwear.
  • Chargers and wirings.
  • Gadgets and electronic devices.

11: Move clutter to one central location.

If you cannot keep certain items, temporarily place them on top of tables or couches.

Place huge items that cannot be housed in the room’s center. Or someplace else with much available room.

Moving them to the middle will allow your Roomba to navigate and clean more efficiently.

12: Tie or organize wires

Wirings are the greatest nightmare of a Roomba.

Aside from the fact that it can hinder the device’s route, it is not an obstruction. Your Roomba can also become entangled in it.

Whenever possible, relocate wires from the floor. Pick them up and suspend them temporarily from surrounding furniture or appliances.

If this is not possible, consider purchasing a wire organizer box to conceal the wires from view. Or at least secure them with tie wire.

13: Place rugs over cords

Have you tried tying up the wires on the floor, but your Roomba is still stuck?

This time, try laying a thin rug over the cords.

It will produce a small ridge, but your Roomba should be able to traverse it.

Due to the fact that Roomba robot vacuums are intended to traverse obstacles and thresholds no higher than 58 inch (15.9 mm).

14: Tie back long curtains

In addition to wiring, Roomba vacuums dislike drapes.

As this can lead the gadget to become entangled, become stuck, and cease cleaning.

If you have long curtains on your windows, you must first secure them. Then, remove them from the path of the gadget.

Additionally, remember to remove the curtain tassels.

15: Block cliff sensors in order to vacuum dark carpets.

All Roombas are equipped with cliff sensors. This unique sensor prevents the Roomba from falling off cliffs and staircases.

In straightforward terms, a cliff sensor employs infrared technology. This sensor detects objects by emitting infrared beams. But when nothing is detected, the region is interpreted as a cliff.

Dark carpets may not reflect infrared beams, causing the Roomba to interpret them as a cliff. Consequently, Roomba frequently avoids dark carpets.

However, there’s a catch!

In the meanwhile, you can cover the cliff sensors to force your gadget to clean dark carpets. Just ensure that the coverings are removed after use.

16: Remove shaggy rugs

Roomba can be tricked into vacuuming dark carpets, but not shaggy rugs.

Vacuuming shag rugs is difficult. Additionally, it is not intended to be cleaned frequently. In addition, it is always preferable to steam-clean shag rugs.

To prevent damage to both the Roomba and the shag rug, remove the rug before operating the equipment.

17: Mop wet floors prior to cleaning

Roomba vacuums are smart. However, it is still a machine. And not all machines are waterproof.

Before beginning a cleaning session, make a tour of your home.

Check whether any of your floors have been stained by water or dog urine.

If so, clean the damp areas beforehand to prevent Roomba from colliding with them.

If you have pets at home, you should relocate their water bowl to a higher location. To prevent your smartphone from colliding with it.

18: Establish a cleaning schedule

With iAdapt 3.0 and Imprint Smart Maps, you can now better control your Roomba.

Using the iRobot Home app, routine cleaning programs may be created.

whether every morning or every night. Or each Saturday during the week.

Regardless of your preference, you can rely on the iRobot Home app to schedule cleaning sessions.

To have your Roomba clean the entire house while you’re gone, simply open the app and assign jobs to the unit.

19: Utilize cleaning modes .

Roomba can clean a variety of floor types.

As a result, iRobot makes it possible to clean diverse floor types with a variety of cleaning modes.

Utilize the cleaning modes of your Roomba to improve its cleaning performance.

Roomba has multiple modes for cleaning. Among these are:

  • Eco Mode is ideal for nighttime or pet cleaning.
  • Automatic Mode is optimal for cleaning carpets and rugs.
  • Performance Mode is appropriate for homes with different types of flooring

These modes can be toggled via the iRobot Home app.

20: Observe its initial cleaning session

The most recent Roomba vacuums feature mapping technology. With the help of Imprint Smart Maps.

This allows your Roomba to develop a more precise map of your home. Allowing you to assign cleaning sessions to specific locations.

Similar to prior models, you must set your gadget in one location and instruct it to “clean everywhere.” As this is how the device initially generates virtual maps.

On more recent series, more precise mapping can be relied upon.

To avoid error, though, watch your Roomba throughout its initial cleaning session.

Remove any anything that could restrict the device.

21: Position dock in an open area

If you’re utilizing a Home Base or Clean Base, be sure to position it in an area with few obstacles.

After each cleaning session, your Roomba must interact with its docking station.

When there are too many obstacles along the route, your device may become disoriented and miss its way home.

Increasing the time required for cleaning. And making your device’s hardware and battery more susceptible to deterioration.

22: Use a WiFi router or mesh network

This applies to Roomba units with WiFi connectivity.

Once Roomba is connected to the internet, it can only be controlled via the iRobot Home app. Unless you reset it.

In other words, your gadget must always be linked to your WiFi.

If your device halts during a cleaning session, it may be due to a connection issue.

For residences with bigger floor areas or multiple floors, a WiFi router or mesh should be installed.

This will assist in ensuring that your Roomba has a reliable and robust internet connection.

23: Leave the lighting on

Newer Roomba models have a photoelectric cell sensor for more precise object detection.

This type of sensor requires light to operate. As it utilizes light beam reflection to perceive its environment.

Therefore, if you are utilizing a Roomba with a photocell sensor, ensure that your residence is adequately illuminated.

If you are performing a cleaning session at night, you should leave the lights on while your Roomba does its job.

24: Use arbitrary objects as bumpers

Try this if you want to alter your Roomba’s cleaning routines to reach previously untouched areas.

Place any object on its intended path. This might be a shoe or a box. When placing a shoe, ensure that its shoelaces are tucked in.

This will compel your gadget to deviate from its usual path. And potentially reach additional virgin locations.

If you are utilizing a Roomba with Imprint Smart Maps technology, you need not worry.

As placing minor impediments will have no effect on the recorded maps.

25: Close doors to enclose the device.

Occasionally, your Roomba can skip cleaning certain rooms.

It can be annoying. Fortunately, there is a brilliant technique to deal with it.

Close the doors if you want your Roomba to completely clean a particular room.

Since its path is obstructed, the device will continue to clean the same room until all areas are covered.

If you wish to prevent the device from traveling through an archway, consider placing multiple shoes on the archway.

26: Install Virtual Wall Lighthouse.

Why not purchase Virtual Wall Lighthouse if you’re on a budget?

Not every Roomba product is compatible with Virtual Wall Lighthouse.

iRobot’s Virtual Wall Lighthouse is a navigation control device. It can restrict and constrain a Roomba to a particular area.

It can prevent your Roomba from accessing restricted locations. For example, a playroom or a stockroom.

This device can also be helpful if you’re having trouble programming Roomba to clean the entire house.

Simply activate the “Lighthouse” switch to have your Roomba clean a single room after another.

27: Use Dual Mode Virtual Wall Barrier

Dual Mode iRobot’s Virtual Wall Barrier is an additional navigation control gadget.

Unlike Lighthouse, Dual Mode Virtual Wall Barrier is compatible with the majority of Roomba models. Therefore, you should have no trouble utilizing it.

Its primary purpose is to restrict Roomba’s access to prohibited places. The distinction is that it has a greater range.

Additionally, you may utilize it to prevent Roomba from approaching specified things. Simply enable the “Virtual Wall” toggle to accomplish this.

By using the “Halo” switch, you may prevent your Roomba from approaching fragile vases, pet water bowls, and indoor plants.

If you wish to clean all aspects of your home, please read on. Verify that the Dual Mode Virtual Wall Barrier has been turned off. As a result, specific areas will continue to be blocked for up to six months.