The term “blown speaker” is used to describe a speaker that isn’t working right or that looks like it isn’t working. In the middle of your favorite song, poor audio quality, crackling, or no audio at all is going to be a big deal.
Make sure that you don’t give up on your speaker right away because it can be fixed. In this way, you won’t have to deal with any more interruptions, and the audio quality will return to its normal state again. Another thing: It doesn’t take a lot of skill to fix a broken speaker, and it can be done fairly quickly.
Below, we have written down each step in the process of fixing a blown speaker.
Step 1: Find the blown speaker.
The first thing you need to do is figure out who the person is who is making the problem. The way you set things up will have an impact on how you do this. If you have a standard set-up, you should be able to tell just by looking at the speaker. However, if the speaker is covered, this can be a little more difficult.
This feature lets you change the balance between speakers. You can also look at the equalizer to see where the sound is lost. If you don’t want to play any audio, you can also turn the volume up as you do so. As the volume gets louder, it will probably be easier to tell when the sound isn’t as good.
If you use the second method to find the speaker who isn’t working, you need to make sure that you don’t do too much because you might hurt the other speaker. Then you can move on to the next step.
Step 2: Find the problem and take apart the speaker.
Now that you know who the speaker is that you think is causing the problem, you need to figure out what the problem is. Before you start dismantling the different parts, you should make sure that it is the one that is causing the problem.
Make sure you don’t damage your speaker if it has a fabric cover, then take it off with care. After you do this, the problem is likely to become more clear. Also, use a screwdriver to remove the metal faceplate from the phone (if your speaker has one).
Next, you’ll need to take the speaker out of the case. You’ll need to make sure that the ignition and the audio player are turned off if you want to use the speaker in your car. Many things could go wrong if you try to fix the speaker while it still has a battery.
Step 3: Take the parts apart.
After you remove the speaker from its case, you can start to remove other parts. They also have the cone and the voice coil. Another thing: There should also be two wires. One should be red, and the other black. Before you touch these wires, make sure you know where you are going to remove them from so that they can be put back in the right place when you finish.
Step 4: Check the voice coil.
If the voice coil is broken, you will need to look for signs that it has started to melt. You might be able to see this, but you might also be able to smell it. Furthermore, if there are any gaps in the coil, this will also change the flow of sound. You’ll need to buy a new speaker if the voice coil is broken.
Step 5: Wipe down the speaker.
If you have a speaker, you’re likely to have a lot of dust. There are soft cloths or pads and alcohol you can use to clean your clothes or shoes this way. Don’t drink too much alcohol, and be careful when you handle the speaker so it doesn’t get broken. Use a cotton swab to clean the parts of your speaker that you can’t reach. When the speaker is clean, you can see the damage more clearly.
Step 6: Buy the replacement parts you need.
Next, you’ll need to buy new parts for your speaker. Order them from the manufacturer, if they have replacement parts. You can also look for a good supplier from another company. Keep track of your speaker and the part that needs to be replaced so that you can be sure you buy the right one.
Step 7: Connect the new parts.
It’s time to replace the old and broken parts on your speaker with new ones that have arrived. Attention to how each part is held in place is important, or you might not put it back the right way.
Step 8: Check out the speaker.
Test out the speaker now that you have put in all of the new parts. If the speaker seems to be working fine, it can be put back in. As long as you still have a problem, you might want to bring it to a professional who can look at the speaker and figure out what’s wrong with it.
When it comes to fixing your speaker again and again, it’s important to note that it won’t work as well in the long run. As a result, it is important to know when it has reached the end of its useful life and can no longer be used.
Repairing a blown speaker isn’t a difficult job, but there are a lot of steps. Some things to look for are sound distortions and a decrease in the quality of the audio. These are signs that your speaker has been blown.
Every step you take must be carefully watched to make sure that all parts are in the right place. In this case, you might need to buy a new speaker or take your speaker to a professional.